API MPMS Chapter 11.1

Temperature and Pressure Volume Correction Factors (VCF) Software for Generalized Crude Oils, Refined Products, and Lubricating Oils (Single User), Includes November 2007 Addendum

May, 2004

American Petroleum Institute

Click Here for Purchase Information

This unique CD-ROM is an electronic version of the adjunct to ASTM D1250 Standard Guide for Use of the Petroleum Measurement Tables; Chapter 11 of API's Manual of Petroleum Measurement Standards; and adjunct to IP 200/04 Petroleum Measurement Tables.



It calculates the combined volume correction factor due to temperature and pressure, CTRL, using the required implementation procedures. Therefore, it provides the functional equivalent of all twelve volumes of the printed petroleum measurement tables and gives you the most accurate and up-to-date computations available. With this adjunct, users will be able to calculate the CTPL for their specific measurements conditions, and to print tables for their range of interest, which usually will be of a limited temperture and pressure range.



Approved by ASTM International, the American Petroleum Institute, and the Energy Institute, this unique CD-ROM generates volume-correction-factors (VCF) based upon petroleum product type, API gravity or density, and temperature. The tables generated from the official implementation procedures, are used worldwide in custody transfer and accounting operations to adjust bulk volumes of crude oil and products measured at temperatures other than base temperature (60° F or 15° C) to the base temperature. Base temperature can also be modified for situations where base temperatures are not 60° F or 15° C.



Because of the expanded temperature ranges, a 325-page table from 1980 would be over 11,000 pages today. The combinations and permutations of possible output make it impractical to publish and stock printed tables is. With this CD-ROM, users will be able to print tables for their range of interest, which usually will be of a limited temperature and pressure range.



Includes FREE copy of ASTM D 1250 Standard Guide for Petroleum Measurement Tables



New Features: Expands output to five decimal places: Performs computations: Compensates for pressure (as an optional component of VCF) : Expands temperature range: Prints tables by their range of interest: Provides functional equivalent of all 12 volumes of the printed tables



System Requirements: PDF Files--To view or print the PDF files you will need Adobe Acrobat© Reader© (free download at www.adobe.com)



VCF Software: To use the utility program for calculations, you will need a computer operating system that supports a Java© enabled web browser. No internet access is needed. The utility program is compatible with Microsoft Windows© 98 and above, Mac OS© X, UNIX©, and LINUX©



This is a single-user license.



Disclaimer

Please Read Carefully and Completely:



The software contained on this CD comes AS IS. Due to many varying factors, the software cannot be guaranteed to work on all systems, nor with all versions of Microsoft Windows or Macintosh operating systems. The licensor does not warrant, guarantee, or make any representation regarding the use, or the result of use of the software, or written materials herein in terms of validity, accuracy, reliability, or otherwise.



By installing the software on this CD, users acknowledge that they have read this Disclaimer and the License Agreement on the CD, understand them, and agree to be bound by all of their terms and conditions.

Keywords :ADJD1250CD H11013



Product Code(s): H11013

Product Replaces

Volume Correction Factors - Volume IX - Table 54C: Volume Correction Factors for Individual and Special Applications, Volume Correction to 15 deg C Against Thermal Expansion Coefficients at 15 deg C
Volume Correction Factors - Volume I - Table 5A: Generalized Crude Oils, Correction of Observed API Gravity to API Gravity at 60 deg F. Table 6A: Generalized Crude Oils, Correction of Volume to 60 deg F Against API Gravity at 60 deg F
Volume Correction Factors - Volume XIII - Table 5D: Generalized Lubricating Oils, Correction of Observed API Gravity to API Gravity at 60 Degrees Fahrenheit. Table 6D: Generalized Lubricating Oils, Correction of Volume to 60 Degrees Fahrenheit Against API Gravity at 60 Degrees Fahrenheit
Volume Correction Factors - Volume XIV - Table 53D: Generalized Lubricating Oils, Correction of Observed Density to Density at 15 Degrees Celsius. Table 54D: Generalized Lubricating Oils, Correction of Volume to 15 Degrees Celsius Against Density at 15 Degrees Celsius
Volume Correction Factors - Volume VIII - Table 53B: Generalized Products, Correction of Observed Density to Density at 15 deg C. Table 54B: Generalized Products, Correction of Volume to 15 deg C Against Density to 15 deg C
Volume Correction Factors - Volume VI - Tables 24C: Volume Correction Factors for Individual and Special Applications, Volume Correction to 60 deg F Against Thermal Expansion Coefficients at 60 deg F
API MPMS Chapter 11.1-Volume II - Volume Correction Factors - Volume II - Table 5B: Generalized Products, Correction of Observed API Gravity to API Gravity at 60 degF. Table 6B: Generalized Products, Correction of Volume to 60 degF Against API Gravity at 60 deg F
API MPMS Chapter 11.1-Volume V - Volume Correction Factors - Volume V - Table 23B: Generalized Products, Correction of Observed Relative Density to Relative Density 60/60 deg F. Table 24B: Generalized Products, Correction of Volume to 60 deg F Against Relative Density 60/60 deg F (Edition: 1st)
Addendum 1 to Volumes III and IX - Volume Correction Factors - for Table 6C: Volume Correction for MTBE to 60 Degrees Fahrenheit - for Table 54C: Volume Correction for MTBE to 15 Degrees Celsius
Volume Correction Factors - Volume IV - Table 23A: Generalized Crude Oils, Correction of Observed Relative Density to Relative Density 60/60 deg F. Table 24A: Generalized Crude Oils, Correction of Volume to 60 deg F Against Relative Density 60/60 degF
Addendum 1 to Volumes III and IX - Volume Correction Factors - for Table 6C: Volume Correction for MTBE to 60 Degrees Fahrenheit - for Table 54C: Volume Correction for MTBE to 15 Degrees Celsius
Volume Correction Factors - Volume X - Background, Development, and Computer Documentation

Product is Related To

Water Calibration of Volumetric Provers
Volume Correction Factors - Volume IX - Table 54C: Volume Correction Factors for Individual and Special Applications, Volume Correction to 15 deg C Against Thermal Expansion Coefficients at 15 deg C
Volume Correction Factors - Volume I - Table 5A: Generalized Crude Oils, Correction of Observed API Gravity to API Gravity at 60 deg F. Table 6A: Generalized Crude Oils, Correction of Volume to 60 deg F Against API Gravity at 60 deg F
SEE ASTM VOLUME XI/XII - Volume Correction Factors - Volume XI/XII - Intraconversion Between Volume Measures and Density Measures Which Contains Tables 1-4, 8-14, 21, 22, 26-31, 33, 34, 51, 52, and 56-58
Volume Correction Factors - Volume III - Table 6C: Volume Correction Factors for Individual and Special Applications, Volume Correction to 60 degrees F Against Thermal Expansion Coefficients at 60 degrees F
Volume Correction Factors - Volume XIII - Table 5D: Generalized Lubricating Oils, Correction of Observed API Gravity to API Gravity at 60 Degrees Fahrenheit. Table 6D: Generalized Lubricating Oils, Correction of Volume to 60 Degrees Fahrenheit Against API Gravity at 60 Degrees Fahrenheit
Volume Correction Factors - Volume XIV - Table 53D: Generalized Lubricating Oils, Correction of Observed Density to Density at 15 Degrees Celsius. Table 54D: Generalized Lubricating Oils, Correction of Volume to 15 Degrees Celsius Against Density at 15 Degrees Celsius
Volume Correction Factors - Volume VIII - Table 53B: Generalized Products, Correction of Observed Density to Density at 15 deg C. Table 54B: Generalized Products, Correction of Volume to 15 deg C Against Density to 15 deg C
Volume Correction Factors - Volume VI - Tables 24C: Volume Correction Factors for Individual and Special Applications, Volume Correction to 60 deg F Against Thermal Expansion Coefficients at 60 deg F
API MPMS Chapter 11.1-Volume II - Volume Correction Factors - Volume II - Table 5B: Generalized Products, Correction of Observed API Gravity to API Gravity at 60 degF. Table 6B: Generalized Products, Correction of Volume to 60 degF Against API Gravity at 60 deg F
Water Calibration of Volumetric Provers
Volume Correction Factors - Volume VII - Table 53A: Generalized crude Oils, Correction of Observed Density to Density at 15 deg C. Table 54A: Generalized Crude Oils, Correction of Volume to 15 deg C Against Density at 15 deg C
API MPMS Chapter 11.1-Volume V - Volume Correction Factors - Volume V - Table 23B: Generalized Products, Correction of Observed Relative Density to Relative Density 60/60 deg F. Table 24B: Generalized Products, Correction of Volume to 60 deg F Against Relative Density 60/60 deg F (Edition: 1st)
Volume Correction Factors - Volume IV - Table 23A: Generalized Crude Oils, Correction of Observed Relative Density to Relative Density 60/60 deg F. Table 24A: Generalized Crude Oils, Correction of Volume to 60 deg F Against Relative Density 60/60 degF
Volume Correction Factors - Volume X - Background, Development, and Computer Documentation
Compressibility Factors for Hydrocarbons: 0-90 degrees API Gravity Range
Standard Guide for Use of the Petroleum Measurement Tables
Density of Water and Water Volume Correction Factors for Calibration of Volumetric Provers (Edition: 1st)